Sissons Stone Clear Finish
Sissons Stone Clear Finish is a specially formulated multi-purpose acrylic clear coating designed to entrance and maintain the natural aesthetics of various residential, commercial and industrial surfaces. The incorporation of suitable and effective additives in this full gloss finish enables it to withstand harsh tropical conditions for extended periods of time.
|
|
| Characteristics and Advantages |
| |
|
| - |
enhances / maintains the natural aesthetics of surfaces.
|
| - |
ease of application either by brush, roller or spraying. |
| - |
moderately quick drying thereby making it feasible for outdoor application. |
| - |
mildew, fungus and algae resistant. |
| - |
resistant to moisture and UV-degradation which in turn gives better protective to the substrate itself.
|
| - |
resistant to efflorescence, alkali or other chemical attacks |
| - |
does not chalk, flake or peel-off. |
| |
|
|
| |
| Please take note that for the application of any painting or coating system, proper and adequate substrate preparation is a must. Surfaces to be painted should be sufficiently dry and clean of loose materials, grease, wax or other contaminants such as pre-exisiting efforescence and mildew growth. Also please avoid painting under conditions which are not conducive for paint application and drying process i.e. Extreme temperatures, high humidity or poor ventilation as these may impair film formation. |
| |
| Technical Data |
| |
|
|
| Composition |
: |
Acrylic resin, aromatic solvents, fungicide,
UV-resistance and surfaces additives.
|
| Appearance |
: |
Clear, water-white liquid. |
| Dry Thickness / Coat |
: |
15-20 microns. |
Theoretical Coverage /
Coat |
: |
14.3 square meters / litre
(subject to surface profile and absorption)
|
| Drying Times |
: |
Touch Dry : 15-20 minutes;
Hard Dry : Below 3 hours;
Recoating : After 4 hours. |
| Recommended System |
: |
2-3 coats (no primer required). |
| Cleaning / Thinning |
: |
Sissons Thinner THE/031. |
| |
|
|
|
| |
| Application Areas |
Sissons Stone Clear Finish is applicable for use on various bare and unglazed interior and exterior substrate surfaces such as:
|
| |
|
| - |
exposed bricks
|
| - |
plasterworks |
| - |
natural / artificial stone aggregates |
| - |
state |
| - |
paver titles
|
| - |
terracotta, concrete or other cement-based roof tiles |
| - |
concrete / quarry / porous titles |
| - |
stamped concrete or other cement-based structure |
| |
|
|
| |
| Glazed surfaces are ‘slippery’ and need to be adequately abraded to enable satisfactory adhesion of Sissons Stone Clear Finish. For pre-coated surfaces, it is advisable to do a compatibility test on a small area before proceeding with the actual painting job. |
| |
| Product Safety |
| Product is deemed to be safe when used according to its intended application under normal industrial hygiene and safety practices. For further information or if Product Safety Data Sheet is required please contact our Sales & Marketing Office. |
| |
|
