| Using your paint roller |
| i |
Fill the paint tray reservoir. Dip the roller fully into the reservoir to load with paint. Lift the roller from the paint reservoir and roll it back and forth on the texture ramp to distribute the paint evenly onto the roller. The roller should be soaked but not dripping when lifted from the paint pan. |
 |
| ii. |
 |
With the loaded roller, make a diagonal sweep (1) about 4’ long on the surface. Use slow stroke to avoid spattering and roll upward on the first stoke to avoid spilling. |
|
| iii. |
 |
Draw the roller straight down (2) from top of the diagonal sweep. Shift the roller to the beginning of the diagonal and roll up (3) |
|
| iv. |
 |
Distribute paint over the rest of the section with horizontal back and forth strokes. |
|
| v. |
 |
Smoothen the area by lightly drawing the roller vertically from the top to bottom of the painted area. Lift the roller and return to the top of the area after each stroke. |
|
|
